Add temporary infinite guide / construction line.
|
Converts regions of connected coplanar welded faces into .
|
New options: BlendStart: PickPoint and CurveEnd.
|
Creates a curve that a hanging chain or cable assumes under its own weight when supported only at its ends.
|
Draw a cross or a cross and center lines at the center point of a curve.
|
Move or copy objects between layout and detail viewports.
|
Remove all per-view, per-object display mode overrides.
|
Copy a hole in a planar surface.
|
|
Checks to see whether numbers with decimal points are being correctly printed and read.
|
Converts on a mesh into triangle or quad faces.
|
Creates a single developable surface between two rails.
|
Spread objects out evenly between the end objects.
|
Opens the Document User Text panel that lets you manage the document text.
|
Downloads required bitmap files for textures.
|
Sets the amount of object drag as a percentage of mouse movement to control the speed of the drag movement.
|
Lengthen a curve by its natural extension to a boundary or point.
|
Tests a bugtrack issue id number to determine if code that was committed to fix the issue is in the actively running Rhino.
|
Manages Grasshopper plug-in (*.gha) loading behavior and locations.
|
Opens the folders where Grasshopper stores files of settings, user objects, clusters or components.
|
Downloads the Grasshopper SDK help document (.CHM) from the Internet.
|
Selects a Grasshopper plug-in file (*.gha) that will be ignored by Grasshopper.
|
Prompts to load Grasshopper plug-ins one by one and then launch Grasshopper.
|
Opens the Grasshopper plug-in window.
|
Shows the plug-ins used in the currently loaded Grasshopper file.
|
Reset the gumball widget alignment.
|
Set the size of the scale handles either relative to the model or to a fixed size.
|
Hide all but the currently selected objects.
|
Lock all but the currently selected objects.
|
Log you into Rhino using your Rhino account.
|
Log you out and returns any licenses borrowed from a Rhino account.
|
The MatchAnnotation command changes an annotation's properties to match another annotation.
|
Create a mesh from intersecting lines.
|
Command name change from MeshTCone to MeshTruncatedCone.
|
Allows moving an isocurve extracted with the ExtractIsocurve command on the surface it was extracted from.
|
Pause a script for the duration of multiple selections, for example in Join, Polyline, and FilletEdge.
|
The Notifications command opens the Notification panel.
|
Copy curves or surface edges parallel to the original.
|
Sets the active construction plane according to the current view direction to accommodate single-window modeling.
|
Draw a parabolic curve through three picked points.
|
Draw a rectangular planar surface with a bitmap texture.
|
Create a series of planar curves by intersecting spaced planes with a point cloud.
|
Display the viewport with real-time rendering that supports calculating reflection and refraction.
|
Removes very small single naked edges that fold or loop back on themselves and have no matching edge to which they can be joined.
|
Remove temporary infinite guide / construction line.
|
Set everything to white - materials, skylighting, ground plane and renders the current viewport.
|
Assign a material to a layer from the command-line.
|
Render a selected area of the current viewport in the render window at the resolution specified in the Rendering panel.
|
|
Open the missing image files report.
|
Command name changed from RemoveEdge to ReplaceEdge.
|
Searches for block definition geometry that is not referenced by any block definition and recovers the block definitions to the file.
|
Clears the "Do not show this dialog/message again" check boxes in all dialogs.
|
Change the spacing between objects.
|
Select annotation objects of a specified style.
|
Select all Rhino SubD objects in the model that do not have a boundary and are not locked or hidden.
|
Select mesh faces from the parent mesh object that are connected to a selected face.
|
|
|
Select all Detail view rectangles in a Layout viewport.
|
Select a using a crossing sketched polyline.
|
Select objects by their user attribute key.
|
Select objects by their user attribute key and value.
|
Select edges from the parent mesh determined by an angle between mesh face normals.
|
Select mesh faces from the parent mesh object that are within a specified range of area.
|
Select mesh faces from the parent mesh object that are greater than the specified aspect ratio limit.
|
Separate mesh faces from the parent mesh object based on the angle of the faces to the view.
|
Select mesh faces from the parent mesh object that have an edge length greater or less than a specified value.
|
Select all mesh faces radiating out from the selected face to naked or unwelded edges in the parent mesh object.
|
Select all Rhino SubD objects in the model that have a boundary and are not locked or hidden.
|
Select all objects created with the Picture command.
|
Select all planar curves.
|
Select all planar surfaces.
|
Select all Rhino SubD objects in the model that are not locked or hidden.
|
Select objects by their user attribute value.
|
Select objects enclosed by an extrusion object, surface, polysurface, or mesh.
|
Open the Direction Analysis control and turn on direction analysis for curves, surfaces, and polysurfaces.
|
Close the Direction Analysis control, and turn off direction analysis.
|
Open the End Analysis control, and display the endpoints of curves.
|
Close the End Analysis control, and turn off endpoints of curves.
|
The Snapshots command saves and restores Named Views, Named Positions, Layer States, as well as rendering settings, object settings including locked/hidden state, display mode, material, position, light settings, curve piping, displacement, edge softening, shutlining, and thickness.
|
Allow object snaps to work on objects that are hidden behind other objects.
|
Create a spherical surface of a given radius tangent to the three selected surfaces.
|
Reports information about the computer hardware and operating system.
|
Constructs a thickness display mesh for surfaces, polysurfaces, or meshes.
|
Command name change from TCone to TruncatedCone.
|
Download and open sample and tutorial models.
|
Unlock objects previously hidden by the IsolateLock command.
|
Show objects previously hidden by the Isolate command.
|
Flatten (develop) a surface or polysurface while preserving the UV of the input surfaces.
|
Unweld selected vertexes.
|
Detects third-party plug-ins on the system and posts their information on a web page.
|
Zoom to include all end display markers on selected curves.
|