ExtrudeSrf

Toolbar

Menu

Toolbar: Extrude Solid | Solid Creation | Solids Sidebar

Extrude Solid
Solid Creation
Solid Editing
Solids Sidebar
Solid Tools

Solid

Extrude Surface>

Extrude Surface to Boundary>

Straight

History enabled. Click for more information. History enabled

The ExtrudeSrf command creates a solid by tracing the path of the surface edges in a straight line.

Steps

Select a surface.
Specify a distance.

A planar surface extrudes vertically to the surface plane by default. If the surface is not planar, the default extrusion direction is the z direction of the active CPlane.
The extrusion preview direction in the viewport defines the positive direction for distance input.

Command-line options
SetBasePoint	Specify a location that serves as the first point when picking two points that set the extrusion distance.
Direction	Two points establish the direction angle. Direction steps Pick a base point. Pick a second point that establishes the direction angle.
BothSides	Draws the object on both sides of the start point, creating the object twice as long as you indicate. The BothSides option demonstrated with the Line command.
Solid	If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface.
DeleteInput	Yes Deletes the original geometry. No Retains the original geometry.
ToBoundary	Extrudes the object to a boundary surface.

See also

Extrude curves and surfaces

Rhinoceros 6 © 2010-2020 Robert McNeel & Associates. 11-Nov-2020