NetworkSrf

Toolbar	Menu
Surface Creation Surface Sidebar	Surface Curve Network

Toolbar

Toolbar: Surface Creation | Surface Sidebar

Surface Creation
Surface Sidebar

Surface

Curve Network

History enabled. Click for more information. History enabled

The NetworkSrf command creates a surface from a network of crossing curves.

All curves in one direction must cross all curves in the other direction and cannot cross each other.

Steps

Select curves.

Command-line options
NoAutoSort	Turns off automatic sorting so you can select the curves manually.

Surface from Curve Network Options

Tolerances

Edge curves

Sets the tolerance for the edge curves. The edges of the surface will be within this value from the edge curves.

Interior curves

Sets the tolerance for the interior curves. The interior of the curve's surface will be within this value.

If the curves themselves are farther apart from each other than the tolerance values, the best guess is made at the surface.

Angle

If the edge curves are surface edges, and you want the surface matching the adjacent surfaces with tangency or curvature continuity, this is the accuracy used to match the surface normals.

Edge Matching

Determines how the edges match the input geometry.

Loose

The surface will match to the input edge curves with less accuracy.

Position / Tangency / Curvature

Sets the continuity for the edge match.